Features
Specifications
The Dremel EZ Lock makes accessory changes easy as PULL - TWIST - RELEASE. The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through plastic. For use with the EZ402 EZ Lock Mandrel.
- Cuts 1/2 In. thick floor tile
- Cuts ceramic materials
- Straight cuts with little dust
- Easy to assemble
- Do not run in excess of 20,000 rpm. Therefore, do not use with a Single-Speed MultiPro Rotary Tool or a Heavy-Duty Flex-Shaft Tool unless you use the #221 Foot Speed Control.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Brand | Dremel |
---|---|
UPC | 080596027490 |
Store Location (Lititz, PA) | Aisle 26 End Cap |
Package Length (in) | 3.40" |
Package Width (in) | 2.00" |
Package Height (in) | 0.80" |
Manufacturer Part Number | EZ545 |
Accessory Type | Rotary Tool Accessory |
Arbor Hole Size | 1/16 in |
Bit Diameter Inch | 1-1/2" |
Blade Tooth Material | Diamond |
Blade/Bit Material | Diamond Grit |
Color / Finish | Grit |
Color Code | Red |
Country of Origin | China |
Cut Off Wheel Diameter | 1-1/2" |
Expansion Slots | No |
GTIN | 00080596027490 |
Kerf (in) | 0.023 |
Mandrel Attachment Type | Quick Change System |
Material | Concrete / Ceramic / Brick |
Maximum RPM | 20000 |
Net Tool Weight (lbs) | 0.1 |
Package Quantity | 1 |
Recommended Bit / Blade Material Application | Clean cuts in hard materials |
Rotary Tool Accessory Type | Cut Off Disc |
Saw Blade Type | Rotary Tool |
Set / Individual | Individual |
Size | 1-1/2 In. |