Features
Specifications
Turn your Dremel rotary tool into a powerful high-speed cutter. Create stylish designs on wood, fiberglass, ceramics, jewelry, soft metals and more. Our powerful, simple-to-use engraving cutters make it easy to express your creativity.
- Secure objects to a stable surface while working.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
- If chattering occurs, increase speed.
- Ideal engraving, carving and routing
- Use on wood, fiberglass, ceramics, plastic, jewelry and soft metals
- Recommended for detail work
- 1/8 In. shank
Brand | Dremel |
---|---|
UPC | 080596035341 |
Store Location (Lititz, PA) | Aisle 26 End Cap |
Package Length (in) | 3.00" |
Package Width (in) | 1.60" |
Package Height (in) | 0.80" |
Manufacturer Part Number | 105 |
Bit Diameter Inch | 1/32" |
Bit Diameter mm | 0.8 mm |
Color / Finish | Silver |
Color Code | Teal |
Country of Origin | Germany |
GTIN | 00080596035341 |
Material | Tungsten |
Overall Length (in) | 1.5 |
Package Quantity | 2 |
Recommended Bit / Blade Material Application | Use on wood, fiberglass, ceramics, plastic, jewelry and soft metals |
Shank Diameter (in) | 0.125 |