1/8 In. Grout Removal Bit
SKU: D570 | Location: Aisle 26 End Cap
$14.49
PICKUP
Your store: PaulB Lititz, PA |
DELIVERY
Ship to your home or business
Only 1 in stock! 1 in stock
Due to the low inventory, we recommend contacting the store to verify availability.
Features
Specifications
Turn your Dremel rotary tool into a fast, efficient grout removal tool. Our carbide grout removal bit gives you just the right amount of power to clean out grout lines so you can replace damaged tiles or update your grout. 1/8 In. steel shank.
- Easily remove both wall and floor grout use with Dremel grout removal attachment
- A high-speed cutter with a 1/8 In. steel shank
- 30 degree angle for controlled cutting
- Guides 180 degrees apart to keep bit centered
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Do not run in excess of 18,000 rpm. Therefore, do not use with a Single-Speed MultiPro Rotary Tool unless you use the #221 Foot Speed Control.
| Brand | Dremel |
|---|---|
| UPC | 080596012250 |
| Store Location (Lititz, PA) | Aisle 26 End Cap |
| Package Length (in) | 2.80" |
| Package Width (in) | 1.40" |
| Package Height (in) | 0.80" |
| Manufacturer Part Number | 570 |
| Bit Diameter Inch | 1/8" |
| Bit Diameter mm | 3.2 mm |
| Bit Size | 1/8" |
| Color / Finish | Metal |
| Color Code | Red |
| Country of Origin | United States of America |
| Etched / Stamped Size Identification | No |
| Material | Carbide Tipped |
| Overall Length (in) | 1.5 |
| Package Quantity | 1 |
| Recommended Bit / Blade Material Application | Grout Removal |
| Shank Diameter (in) | 0.125 |