Features
Specifications
Our powerful tile cutting tool is ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. And if you're feeling creative, you can even use the tool to create a decorative design in your tiles. Just use the tile cutting bit to carve your design, like a sailboat, then fill the grooves with colored grout.
- Cuts ceramic wall tile, cement board and plaster (Not for use on floor tile)
- High-speed cutter
- Great for contractors
- 1/8 In. steel shank
- Start at a 45-degree angle when cutting into a piece of material.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Do not use this bit to cut ceramic floor tile.
- Do not use this bit to cut metal.
Brand | Dremel |
---|---|
UPC | 080596010645 |
Store Location (Lititz, PA) | Aisle 26 End Cap |
Package Length (in) | 3.00" |
Package Width (in) | 1.20" |
Package Height (in) | 0.80" |
Manufacturer Part Number | 562 |
Bit Diameter Inch | 1/8" |
Bit Diameter mm | 3.2 mm |
Bit Size | 1/8" |
Color / Finish | Metal |
Color Code | Red |
Country of Origin | United States of America |
Etched / Stamped Size Identification | No |
Material | High Speed Steel |
Overall Length (in) | 1.5 |
Package Quantity | 1 |
Recommended Bit / Blade Material Application | Tile Cutting |
Shank Diameter (in) | 0.125 |