Dremel

15/16 In. Cut Off Wheel

SKU: D420
Lititz, PA
M-F 6:30am-8:30pm; Sat 6:30am-4:00pm
location-pin All Locations caret-down
Lititz Your Store 4 in stock
Features chevron-down chevron-up
Get a 15/16 In. diameter cut-off wheel made of a hard abrasive material that's used for slicing and cutting metal, including hardened steel. Our cut-off wheel makes it easy to cut bolts or screws, or make slots in rusted or stripped bolts and screws to allow for easy removal with a screwdriver. Pack of 20 wheels.
  • The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
  • Secure objects to a stable surface while working.
  • Hold the tool so that the wheel is at a perpendicular angle to the material being cut.
  • Keep a light touch, as the wheel will break under too much pressure. If chattering occurs, increase speed.
  • Plastics require very slow speeds, because they tend to melt at the contact point. Wood requires low speeds also, always experiment on a scrap first.
  • Use with mandrel 402
  • Makes it easy to cut or slot bolts and screws
  • Use on sheet metal, thin wood and plastic
  • Cuts only along its edge
Specifications chevron-down chevron-up
Brand Dremel
UPC 080596004200
Store Location (Lititz, PA) Aisle 26 End Cap
Package Length (in) 3.00"
Package Width (in) 1.40"
Package Height (in) 1.00"
Manufacturer Part Number 420
Accessory Type Rotary Tool Accessory
Arbor Hole Size 1/8 in
Bit Diameter Inch 15/16"
Bit Diameter mm 23.8 mm
Blade Thickness (in) 0.0625
Blade Tooth Material Emery
Blade/Bit Material Emery
Color / Finish Brown
Color Code Red
Country of Origin Taiwan
Cut Off Wheel Diameter 15/16"
Diameter 15/16"
Expansion Slots No
Kerf (in) 0.0625
Mandrel Attachment Type Screw On
Maximum RPM 30000
Net Tool Weight (lbs) 0.07
Pack Quantity 20
Package Quantity 20
Quantity 20
Recommended Bit / Blade Material Application Cutting Metal
Rotary Tool Accessory Type Cut Off Disc
Saw Blade Type Rotary Tool
Set / Individual Set
Size 0.9375
Thickness 0.040"