Features
Specifications
For cutting metal with limited use on wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood, and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
- Use with mandrel 402
- Makes it easy to cut or slot bolts and screws
- Use on sheet metal, thin wood and plastic
- Cuts only along its edge
- 0.025 In. thick, 36 per vial
- The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
- Secure objects to a stable surface while working.
- Hold the tool so that the wheel is at a perpendicular angle to the material being cut.
- Keep a light touch, as the wheel will break under too much pressure. If chattering occurs, increase speed.
- Plastics require very slow speeds, because they tend to melt at the contact point. Wood requires low speeds also, always experiment on a scrap first.
Brand | Dremel |
---|---|
UPC | 080596004095 |
Store Location (Lititz, PA) | Aisle 26 End Cap |
Package Length (in) | 1.80" |
Package Width (in) | 1.40" |
Package Height (in) | 0.80" |
Manufacturer Part Number | 409 |
Accessory Type | Rotary Tool Accessory |
Arbor Hole Size | 1/8 in |
Bit Diameter Inch | 15/16" |
Bit Diameter mm | 23.8 mm |
Blade Thickness (in) | 0.025 |
Blade Tooth Material | Emery |
Blade/Bit Material | Emery |
Color / Finish | Red |
Color Code | Red |
Country of Origin | Taiwan |
Cut Off Wheel Diameter | 15/16" |
Expansion Slots | No |
Kerf (in) | 0.025 |
Mandrel Attachment Type | Screw On |
Maximum RPM | 35000 |
Net Tool Weight (lbs) | 0.07 |
Pack Quantity | 36 |
Package Quantity | 36 |
Recommended Bit / Blade Material Application | For cutting metal with limited use on wood and plastic |
Rotary Tool Accessory Type | Cut Off Disc |
Saw Blade Type | Rotary Tool |
Set / Individual | Set |
Size | 15/16 In. |
Thickness | 0.025" |