Features
Specifications
A high-speed cutter with teeth made of tungsten carbide, the hardest material next to diamonds.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Secure objects to a stable surface while working.
- Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
- If chattering occurs, increase speed.
- Fast-cutting, sharp teeth for greater material removal
- Use on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile
- A high-speed cutter made of tungsten carbide, the hardest material next to diamonds
- Use the sides of the cutter (rather than the tip) for effective cutting
Brand | Dremel |
---|---|
UPC | 080596099350 |
Store Location (Lititz, PA) | Aisle 26 End Cap |
Package Length (in) | 2.20" |
Package Width (in) | 1.60" |
Package Height (in) | 0.40" |
Manufacturer Part Number | 9935 |
Bit Diameter Inch | 5/16" |
Bit Diameter mm | 7.9 mm |
Bit Size | 5/16" |
Color / Finish | Metal |
Color Code | Teal |
Country of Origin | United States of America |
Etched / Stamped Size Identification | No |
Material | Tungsten Carbide |
Overall Length (in) | 1.5 |
Package Quantity | 1 |
Recommended Bit / Blade Material Application | Cutting Soft Materials |
Shank Diameter (in) | 0.125 |