Features
Specifications
Contains 69 cut-off wheels (our most popular cutting bits) and a 402 mandrel. Reslot a screw, cut hardened steel, rusted bolts and more.
- Collet 481 or Dremel Chuck 4486 needed for use with engraving cutter 107.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
- Reusable storage box
- Application and material usage information included
- 400 Series XPR storage case compatible
- Removable organizer tray
Brand | Dremel |
---|---|
UPC | 080596014278 |
Store Location (Lititz, PA) | Aisle 26 End Cap |
Package Length (in) | 6.20" |
Package Width (in) | 3.20" |
Package Height (in) | 1.40" |
Manufacturer Part Number | 688-01 |
Additional Contents | None |
Arbor Hole Size | 1/16 in |
Bits Included | 540(5), 402, 409 (36), 420 (24), 426 (3) |
Blade Thickness (in) | 0.026 |
Blade Tooth Material | Fiberglass |
Bristle Material | Not Applicable |
Color Code | Blue |
Country of Origin | Taiwan |
Cut Off Wheel Diameter | 1-1/4" |
GTIN | 00080596014278 |
Grinding Component Material | Emery, Fiberglass |
Grit | N/A |
Kerf (in) | 0.032 |
Mandrel Attachment Type | Screw On |
Maximum RPM | 35000 |
Package Quantity | 69 |
Rotary Tool Accessory Type | Bits |