Features
Specifications
Stabile levels are unparalleled with regard to their accuracy and dependability. The secret - the vials made of block acrylic glass are firmly epoxy-locked in the frame. A perfect system. The vial is firmly cast in the high strength aluminum frame with non-shrink epoxy. No re-adjustment, no realignment, no tensioning against springs made of steel or fatigued plastic, no welding or clamping stresses. Just as accurate after 10 years as on the first day.
- Type 196 Our number 1 selling frame design
- Certified Level Accuracy 0.029 degrees - 1/32 inch over 72 inche - 0.5mm per meter right-side up or upside down
- Every level is electronically adjusted, then accuracy inspected and certified
- Vials read the same in all positions
- Bright easy to read vials will not leak, break, fog or require re-calibration
- Level accuracy guaranteed for life
- Sizes 16 inch to 72 inch have machined top and bottom measuring surfaces
- Sizes 16 inch to 48 inch have an open (300 degree) center vial. 59 inch to 96 inch have a double bridged center vial
- Rib-reinforced frame for high strength and light weight
- Frame will not warp or twist
- Rubberized hand grips for comfort and grip
- Shock-Absorbing Removable Endcaps: Prevent slipping on walls and marking walls
- Endcaps can be removed to carry pencil lines tight into corners
- Large metal hang hole to store the level up and off of the work surface
- Electrostatic Enamel Finish: Baked on tough, cleans up with water and brush
Brand | Stabila |
---|---|
UPC | 089634374169 |
Store Location (Lititz, PA) | Aisle 25, Section H1 |
Package Length (in) | 14.80" |
Package Width (in) | 2.80" |
Package Height (in) | 1.00" |
Manufacturer Part Number | 37416 |
Type | Type 196 |
Accuracy | +/- 1/32 in |
Number of Vials | 2 |
Vial Type | Bubble |
Vial Material | Plastic |
Vial Positions | Up/Down |
Frame Material | Aluminum |
Finish | Electrostatic Enamel |
Color | Yellow, Red |
Length | 16 in |
End Caps | Removable/Wall Grips/Shock Absorbing |
Profile | Rectangular Profile with Ribs |
Number of Measuring Surfaces | 2 |
Application | For craftsmen who subject their tools to extremely demanding conditions and need to measure in all positions |