Jigsaw TRION, PSB 300 EQ-Plus

The secret to splinter-free cuts is full material support at the cutting point. Trion jigsaw splinter guards are designed to be cut by the blade for perfect zero-clearance between the blade and the splinterguard. The resultant cut is clean through the entire piece with little or no finishing required. The D-handle PSB 300 features a finger tip trigger and smaller profile grip. The PSB 300 has all the qualities of the PS 300, with the addition of a comfortable D-handle for easy one-handed use.

• Carbide guidance system keeps the blade perpendicular to the shoe for improved cut results, even in thick stock.
• Zero clearance splinterguard are solid one-piece inserts that are cut with the blade mounted in the machine for a clean, splinter-free cut.
• Dust extraction channels integrated in the base plate coupled with a clear chip deflector a rear dust extraction port provide for cleaner work area.
• MMC electronics provide soft start to reduce start up jolts, variable speed to match the speed to the material, and constant speed under load.
• MMC Eletronics - Features soft-start, variable speed control so the blade speed matches the material; constant speed under load for consistent blade tip speed, and improved cut quality.
• Dual-Port Dust Extraction & Chip Deflector - Channels integrated in the base plate, coupled with the chip deflector, provide effective dust extraction.
• Variable stroke - Four unique stroke settings vary from straight plunge action for smooth cuts to aggressive orbital action for rapid cuts.
• Carbide guidance system - Rigidly supports the blade at exactly the pre-set angle, reducing blade wander in tight radius cuts; eliminating cutting errors, spoiled workpieces, or need for rework.
• Zero Clearance Splinterguard - Solid one-piece splinterguards are cut with the blade mounted in the machine. This gives you precise zero clearance for ultra clean cuts with no splinters or tear out.
• FastFix - Allows for quick, tool-free blade changes. FastFix lever angles and opens the chuck for easy blade removal.
• Non-Marring Sub-Base - The non-marring, plastic sub-base allows you to work on finished material without concern for damage or marking.
• 13' Plug-It power cord - Festool Plug-It system allows you to quickly switch between the jigsaw and just about any other tool, reducing downtime, and simplifying packing.
• Dual Bevel Base - 45° dual bevel for angled cuts and a zero degree detent for perpendicular cuts.
• D-Handle Grip Design - A D-Handle design, found to be easier to use and more comfortable for most hobbyists.