Drillco

Jobber Length Drill Bit- Bright

#1, Jobber Length Drill Bright

#2, Jobber Length Drill Bright

#3, Jobber Length Drill Bright

#4, Jobber Length Drill Bright

#5, Jobber Length Drill Bright

#6, Jobber Length Drill Bright

#7, Jobber Length Drill Bright

#8, Jobber Length Drill Bright

#9, Jobber Length Drill Bright

#10, Jobber Length Drill Bright

#11, Jobber Length Drill Bright

#12, Jobber Length Drill Bright

#13, Jobber Length Drill Bright

#14, Jobber Length Drill Bright

#15, Jobber Length Drill Bright

#16, Jobber Length Drill Bright

#17, Jobber Length Drill Bright

#18, Jobber Length Drill Bright

#19, Jobber Length Drill Bright

#20, Jobber Length Drill Bright

#21, Jobber Length Drill Bright

#22, Jobber Length Drill Bright

#23, Jobber Length Drill Bright

#24, Jobber Length Drill Bright

#25, Jobber Length Drill Bright

#26, Jobber Length Drill Bright

#27, Jobber Length Drill Bright

#28, Jobber Length Drill Bright

#29, Jobber Length Drill Bright

#30, Jobber Length Drill Bright

#31, Jobber Length Drill Bright

#32, Jobber Length Drill Bright

#33, Jobber Length Drill Bright

#34, Jobber Length Drill Bright

#35, Jobber Length Drill Bright

#36, Jobber Length Drill Bright

#37, Jobber Length Drill Bright

#38, Jobber Length Drill Bright

#39, Jobber Length Drill Bright

#40, Jobber Length Drill Bright

#41, Jobber Length Drill Bright

#42, Jobber Length Drill Bright

#43, Jobber Length Drill Bright

#44, Jobber Length Drill Bright

#45, Jobber Length Drill Bright

#46, Jobber Length Drill Bright

#47, Jobber Length Drill Bright

#48, Jobber Length Drill Bright

#49, Jobber Length Drill Bright

#50, Jobber Length Drill Bright

#51, Jobber Length Drill Bright

#52, Jobber Length Drill Bright

#53, Jobber Length Drill Bright

#54, Jobber Length Drill Bright

#55, Jobber Length Drill Bright

#56, Jobber Length Drill Bright

#57, Jobber Length Drill Bright

#58, Jobber Length Drill Bright

#59, Jobber Length Drill Bright

#60, Jobber Length Drill Bright

#61, Jobber Length Drill Bright

#62, Jobber Length Drill Bright

#63, Jobber Length Drill Bright

#64, Jobber Length Drill Bright

#65, Jobber Length Drill Bright

#66, Jobber Length Drill Bright

#67, Jobber Length Drill Bright

#69, Jobber Length Drill Bright

#70, Jobber Length Drill Bright

#71, Jobber Length Drill Bright

#72, Jobber Length Drill Bright

#74, Jobber Length Drill Bright

#75, Jobber Length Drill Bright

#76, Jobber Length Drill Bright

#77, Jobber Length Drill Bright

#78, Jobber Length Drill Bright

#79, Jobber Length Drill Bright

#80, Jobber Length Drill Bright

SKU: D280B-
SKU: D280B001
SKU: D280B002
SKU: D280B003
SKU: D280B004
SKU: D280B005
SKU: D280B006
SKU: D280B007
SKU: D280B008
SKU: D280B009
SKU: D280B010
SKU: D280B011
SKU: D280B012
SKU: D280B013
SKU: D280B014
SKU: D280B015
SKU: D280B016
SKU: D280B017
SKU: D280B018
SKU: D280B019
SKU: D280B020
SKU: D280B021
SKU: D280B022
SKU: D280B023
SKU: D280B024
SKU: D280B025
SKU: D280B026
SKU: D280B027
SKU: D280B028
SKU: D280B029
SKU: D280B030
SKU: D280B031
SKU: D280B032
SKU: D280B033
SKU: D280B034
SKU: D280B035
SKU: D280B036
SKU: D280B037
SKU: D280B038
SKU: D280B039
SKU: D280B040
SKU: D280B041
SKU: D280B042
SKU: D280B043
SKU: D280B044
SKU: D280B045
SKU: D280B046
SKU: D280B047
SKU: D280B048
SKU: D280B049
SKU: D280B050
SKU: D280B051
SKU: D280B052
SKU: D280B053
SKU: D280B054
SKU: D280B055
SKU: D280B056
SKU: D280B057
SKU: D280B058
SKU: D280B059
SKU: D280B060
SKU: D280B061
SKU: D280B062
SKU: D280B063
SKU: D280B064
SKU: D280B065
SKU: D280B066
SKU: D280B067
SKU: D280B069
SKU: D280B070
SKU: D280B071
SKU: D280B072
SKU: D280B074
SKU: D280B075
SKU: D280B076
SKU: D280B077
SKU: D280B078
SKU: D280B079
SKU: D280B080
Select options to see availability
Lititz, PA
M-F 6:30am-8:30pm; Sat 6:30am-4:00pm
location-pin All Locations caret-down

Options

This product must be picked up in-store.
This product must be picked up in-store.
Features chevron-down chevron-up
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
This drill is designed for general purpose drilling under a wide range of drilling conditions. It can drill various materials such as cast iron, steel, and steel forging. The softer alloys (Aluminim and Aluminum Alloys) will require drills with bright, polished flutes to prevent chip packing and material buildup.
  • Number
  • High Speed Steel
  • Bright
  • 118° Point
  • Straight Shank
Specifications chevron-down chevron-up
Brand Drillco
UPC 045996991550
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B001
Package Size / MOQ 12
Series 280B
Flute Length 2.5/8
Country Of Origin USA
Brand Drillco
UPC 045996991550
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B001
Package Size / MOQ 12
Series 280B
Flute Length 2.5/8
Country Of Origin USA
Brand Drillco
UPC 045996991567
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B002
Package Size / MOQ 12
Series 280B
Flute Length 2.1/2
Country Of Origin USA
Brand Drillco
UPC 045996991550
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B003
Package Size / MOQ 12
Series 280B
Flute Length 2.1/2
Country Of Origin USA
Brand Drillco
UPC 045996991581
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B004
Package Size / MOQ 12
Series 280B
Flute Length 2.1/2
Country Of Origin USA
Brand Drillco
UPC 045996991598
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B005
Package Size / MOQ 12
Series 280B
Flute Length 2.1/2
Country Of Origin USA
Brand Drillco
UPC 045996991604
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B006
Package Size / MOQ 12
Series 280B
Flute Length 2.1/2
Country Of Origin USA
Brand Drillco
UPC 045996991550
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B007
Package Size / MOQ 12
Series 280B
Flute Length 2.7/16
Country Of Origin USA
Brand Drillco
UPC 045996991628
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B008
Package Size / MOQ 12
Series 280B
Flute Length 2.7/16
Country Of Origin USA
Brand Drillco
UPC 045996991635
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B009
Package Size / MOQ 12
Series 280B
Flute Length 2.7/16
Country Of Origin USA
Brand Drillco
UPC 045996991642
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B010
Package Size / MOQ 12
Series 280B
Flute Length 2.7/16
Country Of Origin USA
Brand Drillco
UPC 045996991659
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B011
Package Size / MOQ 12
Series 280B
Flute Length 2.5/16
Country Of Origin USA
Brand Drillco
UPC 045996991666
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B012
Package Size / MOQ 12
Series 280B
Flute Length 2.5/16
Country Of Origin USA
Brand Drillco
UPC 045996991673
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B013
Package Size / MOQ 12
Series 280B
Flute Length 2.5/16
Country Of Origin USA
Brand Drillco
UPC 045996991680
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B014
Package Size / MOQ 12
Series 280B
Flute Length 2.3/16
Country Of Origin USA
Brand Drillco
UPC 045996991697
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B015
Package Size / MOQ 12
Series 280B
Flute Length 2.3/16
Country Of Origin USA
Brand Drillco
UPC 045996991703
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B016
Package Size / MOQ 12
Series 280B
Flute Length 2.3/16
Country Of Origin USA
Brand Drillco
UPC 045996991710
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B017
Package Size / MOQ 12
Series 280B
Flute Length 2.3/16
Country Of Origin USA
Brand Drillco
UPC 045996991727
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B018
Package Size / MOQ 12
Series 280B
Flute Length 2.1/8
Country Of Origin USA
Brand Drillco
UPC 045996991734
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B019
Package Size / MOQ 12
Series 280B
Flute Length 2.1/8
Country Of Origin USA
Brand Drillco
UPC 045996991741
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B020
Package Size / MOQ 12
Series 280B
Flute Length 2.1/8
Country Of Origin USA
Brand Drillco
UPC 045996991550
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B021
Package Size / MOQ 12
Series 280B
Flute Length 2.1/8
Country Of Origin USA
Brand Drillco
UPC 045996991765
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B022
Package Size / MOQ 12
Series 280B
Flute Length 2
Country Of Origin USA
Brand Drillco
UPC 045996991772
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 1.20"
Package Height (in) 1.20"
Manufacturer Part Number 280B023
Package Size / MOQ 12
Series 280B
Flute Length 2
Country Of Origin USA
Brand Drillco
UPC 045996991789
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 1.20"
Package Height (in) 1.20"
Manufacturer Part Number 280B024
Package Size / MOQ 12
Series 280B
Flute Length 2
Country Of Origin USA
Brand Drillco
UPC 045996991550
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 1.20"
Package Height (in) 1.20"
Manufacturer Part Number 280B025
Package Size / MOQ 12
Series 280B
Flute Length 1.7/8
Country Of Origin USA
Brand Drillco
UPC 045996991802
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 1.20"
Package Height (in) 1.20"
Manufacturer Part Number 280B026
Package Size / MOQ 12
Series 280B
Flute Length 1.7/8
Country Of Origin USA
Brand Drillco
UPC 045996991819
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B027
Package Size / MOQ 12
Series 280B
Flute Length 1.7/8
Country Of Origin USA
Brand Drillco
UPC 045996991826
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B028
Package Size / MOQ 12
Series 280B
Flute Length 1.3/4
Country Of Origin USA
Brand Drillco
UPC 045996991833
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B029
Package Size / MOQ 12
Series 280B
Flute Length 1.3/4
Country Of Origin USA
Brand Drillco
UPC 754166115596
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B030
Package Size / MOQ 12
Series 280B
Flute Length 1.5/8
Country Of Origin USA
Brand Drillco
UPC 045996991857
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B031
Package Size / MOQ 12
Series 280B
Flute Length 1.5/8
Country Of Origin USA
Brand Drillco
UPC 045996991550
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B032
Package Size / MOQ 12
Series 280B
Flute Length 1.5/8
Country Of Origin USA
Brand Drillco
UPC 045996991871
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B033
Package Size / MOQ 12
Series 280B
Flute Length 1.1/2
Country Of Origin USA
Brand Drillco
UPC 045996991888
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B034
Package Size / MOQ 12
Series 280B
Flute Length 1.1/2
Country Of Origin USA
Brand Drillco
UPC 045996991895
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B035
Package Size / MOQ 12
Series 280B
Flute Length 1.1/2
Country Of Origin USA
Brand Drillco
UPC 045996991901
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B036
Package Size / MOQ 12
Series 280B
Flute Length 1.7/16
Country Of Origin USA
Brand Drillco
UPC 045996991918
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B037
Package Size / MOQ 12
Series 280B
Flute Length 1.7/16
Country Of Origin USA
Brand Drillco
UPC 045996991925
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B038
Package Size / MOQ 12
Series 280B
Flute Length 1.7/16
Country Of Origin USA
Brand Drillco
UPC 045996991932
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B039
Package Size / MOQ 12
Series 280B
Flute Length 1.3/8
Country Of Origin USA
Brand Drillco
UPC 045996991949
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B040
Package Size / MOQ 12
Series 280B
Flute Length 1.3/8
Country Of Origin USA
Brand Drillco
UPC 045996991956
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B041
Package Size / MOQ 12
Series 280B
Flute Length 1.3/8
Country Of Origin USA
Brand Drillco
UPC 045996991963
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B042
Package Size / MOQ 12
Series 280B
Flute Length 1.1/4
Country Of Origin USA
Brand Drillco
UPC 045996991970
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B043
Package Size / MOQ 12
Series 280B
Flute Length 1.1/4
Country Of Origin USA
Brand Drillco
UPC 045996991987
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B044
Package Size / MOQ 12
Series 280B
Flute Length 1.1/8
Country Of Origin USA
Brand Drillco
UPC 045996991994
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B045
Package Size / MOQ 12
Series 280B
Flute Length 1.1/8
Country Of Origin USA
Brand Drillco
UPC 045996992007
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B046
Package Size / MOQ 12
Series 280B
Flute Length 1.1/8
Country Of Origin USA
Brand Drillco
UPC 045996992014
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B047
Package Size / MOQ 12
Series 280B
Flute Length 1
Country Of Origin USA
Brand Drillco
UPC 045996992021
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B048
Package Size / MOQ 12
Series 280B
Flute Length 1
Country Of Origin USA
Brand Drillco
UPC 045996992038
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B049
Package Size / MOQ 12
Series 280B
Flute Length 1
Country Of Origin USA
Brand Drillco
UPC 045996992045
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B050
Package Size / MOQ 12
Series 280B
Flute Length 1
Country Of Origin USA
Brand Drillco
UPC 045996992052
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B051
Package Size / MOQ 12
Series 280B
Flute Length 1
Country Of Origin USA
Brand Drillco
UPC 045996992069
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B052
Package Size / MOQ 12
Series 280B
Flute Length 7/8
Country Of Origin USA
Brand Drillco
UPC 045996992076
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B053
Package Size / MOQ 12
Series 280B
Flute Length 7/8
Country Of Origin USA
Brand Drillco
UPC 045996992083
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B054
Package Size / MOQ 12
Series 280B
Flute Length 7/8
Country Of Origin USA
Brand Drillco
UPC 045996992090
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.40"
Package Width (in) 1.00"
Package Height (in) 1.00"
Manufacturer Part Number 280B055
Package Size / MOQ 12
Series 280B
Flute Length 7/8
Country Of Origin USA
Brand Drillco
UPC 045996992106
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B056
Package Size / MOQ 12
Series 280B
Flute Length 3/4
Country Of Origin USA
Brand Drillco
UPC 045996992113
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B057
Package Size / MOQ 12
Series 280B
Flute Length 3/4
Country Of Origin USA
Brand Drillco
UPC 045996992120
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B058
Package Size / MOQ 12
Series 280B
Flute Length 11/16
Country Of Origin USA
Brand Drillco
UPC 045996992137
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B059
Package Size / MOQ 12
Series 280B
Flute Length 11/16
Country Of Origin USA
Brand Drillco
UPC 045996992144
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B060
Package Size / MOQ 12
Series 280B
Flute Length 11/16
Country Of Origin USA
Brand Drillco
UPC 045996992151
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B061
Package Size / MOQ 12
Series 280B
Flute Length 11/16
Country Of Origin USA
Brand Drillco
UPC 045996992168
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B062
Package Size / MOQ 12
Series 280B
Flute Length 5/8
Country Of Origin USA
Brand Drillco
UPC 045996992175
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B063
Package Size / MOQ 12
Series 280B
Flute Length 5/8
Country Of Origin USA
Brand Drillco
UPC 045996992182
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B064
Package Size / MOQ 12
Series 280B
Flute Length 5/8
Country Of Origin USA
Brand Drillco
UPC 045996992199
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B065
Package Size / MOQ 12
Series 280B
Flute Length 5/8
Country Of Origin USA
Brand Drillco
UPC 045996992205
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B066
Package Size / MOQ 12
Series 280B
Flute Length 1/2
Country Of Origin USA
Brand Drillco
UPC 045996992212
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B067
Package Size / MOQ 12
Series 280B
Flute Length 1/2
Country Of Origin USA
Brand Drillco
UPC 045996992236
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B069
Package Size / MOQ 12
Series 280B
Flute Length 1/2
Country Of Origin USA
Brand Drillco
UPC 045996992243
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B070
Package Size / MOQ 12
Series 280B
Flute Length 3/8
Country Of Origin USA
Brand Drillco
UPC 045996992250
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B071
Package Size / MOQ 12
Series 280B
Flute Length 3/8
Country Of Origin USA
Brand Drillco
UPC 045996992267
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B072
Package Size / MOQ 12
Series 280B
Flute Length 5/16
Country Of Origin USA
Brand Drillco
UPC 045996992281
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B074
Package Size / MOQ 12
Series 280B
Flute Length 1/4
Country Of Origin USA
Brand Drillco
UPC 045996992298
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B075
Package Size / MOQ 12
Series 280B
Flute Length 1/4
Country Of Origin USA
Brand Drillco
UPC 045996992304
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B076
Package Size / MOQ 12
Series 280B
Flute Length 3/16
Country Of Origin USA
Brand Drillco
UPC 045996992311
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B077
Package Size / MOQ 12
Series 280B
Flute Length 3/16
Country Of Origin USA
Brand Drillco
UPC 045996992328
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B078
Package Size / MOQ 12
Series 280B
Flute Length 3/16
Country Of Origin USA
Brand Drillco
UPC 045996992335
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B079
Package Size / MOQ 12
Series 280B
Flute Length 1/8
Country Of Origin USA
Brand Drillco
UPC 045996992342
Store Location (Lititz, PA) Aisle 20, Section I4
Package Length (in) 0.60"
Package Width (in) 0.80"
Package Height (in) 0.80"
Manufacturer Part Number 280B080
Package Size / MOQ 12
Series 280B
Flute Length 1/8
Country Of Origin USA
Downloads chevron-down chevron-up

download  Safety Data Sheet