Features
Specifications
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
- Meets International Code Council, Evaluation Service (ICC-ES), ESR-2024 Standard
- Code compliant with the International Building Code/International Residential Code: 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, lightweight concrete, concrete over steel deck, concrete masonry and steel
Brand | Dewalt Anchors |
---|---|
UPC | 075352628776 |
Store Location (Lititz, PA) | Aisle 28, Section X5 |
Package Length (in) | 3.20" |
Package Width (in) | 3.00" |
Package Height (in) | 5.20" |
Manufacturer Part Number | 50057-PWR |
Type | Standard Ballistic Point |
Shank Diameter | 0.181 in, 0.15 in |
Shank Length | 1-7/8 in |
Pin Finish | Black Coating |
Applicable Materials | Concrete Masonry and Steel |