The L6206 Fiberglass 6-foot Leaning Ladder is ideal for the professional. With a duty rating of 300 pounds, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard step ladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in step ladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent-pending single-latch design stays engaged when needed and is centrally located to easily open and close.

• Step ladder mode & leaning mode
• Non-marring rubber bumper for a secure hold
• Ladder top holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Rail latch easily locks in place to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both modes
• Double-riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Heavy-duty internal spreaders
• Full set of rear horizontals spaced one per foot
• EDGE360® bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates, or washer to protect rails
• Step ladder mode has a maximum standing height of 3 feet 10 inches and a maximum reach height of 10 feet
• Leaning mode has a maximum height of 2 feet 10 inches and a maximum reach height of 9 feet

The L6206 Fiberglass 6-foot Leaning Ladder is ideal for the professional. With a duty rating of 300 pounds, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard step ladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in step ladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent-pending single-latch design stays engaged when needed and is centrally located to easily open and close.

• Step ladder mode & leaning mode
• Non-marring rubber bumper for a secure hold
• Ladder top holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Rail latch easily locks in place to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both modes
• Double-riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Heavy-duty internal spreaders
• Full set of rear horizontals spaced one per foot
• EDGE360® bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates, or washer to protect rails
• Step ladder mode has a maximum standing height of 3 feet 10 inches and a maximum reach height of 10 feet
• Leaning mode has a maximum height of 2 feet 10 inches and a maximum reach height of 9 feet

The L6204 Fiberglass 4-foot Leaning Ladder is ideal for the professional. With a duty rating of 300 pounds, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard step ladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in step ladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent pending single latch design stays engaged when needed, and is centrally located to easily open and close.

• Step ladder mode & leaning mode
• Non-marring rubber bumper for a secure hold
• Ladder top holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Rail latch easily locks in place to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both modes
• Double-riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Heavy-duty internal spreaders
• Full set of rear horizontals spaced one per foot
• EDGE360® bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates, or washer to protect rails
• Step ladder mode has a maximum standing height of 1 feet 8 inches and a maximum reach height of 8 feet 4 inches
• Leaning mode has a maximum height of 10 inches and a maximum reach height of 7 feet 3 inches

The L6210 Fiberglass 10-foot Leaning Ladder is ideal for the professional. With a duty rating of 300 pounds, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard step ladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in step ladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent-pending single-latch design stays engaged when needed, and is centrally located to easily open and close.

• Step ladder mode & leaning mode
• Non-marring rubber bumper for a secure hold
• Ladder top holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Rail latch easily locks in place to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both modes
• Double-riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Heavy-duty internal spreaders
• Full set of rear horizontals spaced one per foot
• EDGE360® bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates, or washer to protect rails
• Step ladder mode has a maximum standing height of 7 feet 8 inches and a maximum reach height of 14 feet
• Leaning mode has a maximum height of 6 feet 8 inches and a maximum reach height of 13 feet

The L6208 Fiberglass 8-foot Leaning Ladder is ideal for the professional. With a duty rating of 300 pounds, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard step ladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in step ladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent-pending single-latch design stays engaged when needed and is centrally located to easily open and close.

• Step ladder mode & leaning mode
• Non-marring rubber bumper for a secure hold
• Ladder top holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Rail latch easily locks in place to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both modes
• Double-riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Heavy-duty internal spreaders
• Full set of rear horizontals spaced one per foot
• EDGE360® bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates, or washer to protect rails
• Step ladder mode has a maximum standing height of 5 feet 9 inches and a maximum reach height of 12 feet
• Leaning mode has a maximum height of 4 feet 9 inches and a maximum reach height of 11 feet