Kilz

Upshot Oil-Based Primer/Sealer (Flat - White) 10 oz

SKU: 11748
Lititz, PA
M-F 6:30am-8:30pm; Sat 6:30am-4:00pm
location-pin All Locations caret-down
Lititz Your Store Not stocked
Features chevron-down chevron-up
KILZ UPSHOT Stain sealer blocks out most stains caused by water, smoke, tannin, ink, pencil, felt marker, or grease and seals pet and smoke odors. Use on interior surfaces including wood, drywall, plaster, paneling, wallpaper, masonry, brick, painted metal, and properly prepared glossy surfaces.
  • Use at room temperature
  • 2-3 thin coats produce best results
  • Topcoat with latex or oil-based paint after 15 minutes
  • Cover adjacent areas to protect from overspray
Specifications chevron-down chevron-up
Brand Kilz
Date Added May 12, 2026
Package Length (in) 2.25"
Package Width (in) 2.25"
Package Height (in) 8.13"
Applicable Materials Brick Drywall Masonry Painted Metal Paneling Plaster Properly Prepared Glossy Surfaces Wallpaper Wood
Application Method Spray
Application Temperature 50 to 90 deg F
Base Type Oil
Boiling Point 247.9 deg F
Color White
Compositions Acetone Naphtha (Petroleum) Hydrotreated Light Butane Propane Talc Titanium Dioxide Limestone 2-Butanone Oxime
Coverage Area 14-19 sq ft
Drying Time 15 to 30 min
Flammability Rating 4
Flash Point -155.9 deg F
Interior/Exterior Interior
Net Content 10 oz
Sheen Flat
Vehicle Type Modified Alkyd
VOC Content 60 %
Product Type Aerosol Primer/Sealer
Full Cure Time 30 day
Recommended Surface All Surfaces
Clean Up Paint Thinner
Tintable Yes
Stain Blocking Yes
Paint & Primer Together No
Mildew Resistant Finish No
Durability/Warranty Limited Lifetime Warranty